Edac Wireless Analog/Pressure Sensor Transmitter | EDAC

AD1 – Analog/Pressure

Home » Our Products » AD1 – Analog/Pressure

AD1 – Analog/Pressure

Offers three 0-5 V analog inputs (24-bit ADC) and can be used with third-party pressure sensors/transducers or other analog signal output devices. Both zero and maximum points can be calibrated using the LCD puck.

Equipped with one discrete input for exception reporting and works with dry contact switches or open-drain output/NPN devices.

The combination of analog and discrete inputs is ideal for use on wellheads for monitoring casing, tubing, and surface pressure levels as well as monitoring arrival sensor.

Description

Edac WT Series Wireless Analog/Pressure Sensor Transmitter is a self-contained, battery-powered monitoring solution for a variety of industrial applications made especially for the remote, rugged environments without access to a power line.

  • This transmitter offers three 0-5 V analog inputs (24-bit ADC) and can be used with third-party pressure sensors/transducers or other analog signal output devices. Both zero and maximum points can be calibrated using the LCD puck. This device is also equipped with one discrete input for exception reporting and works with dry contact switches or open-drain output/NPN devices. This combination of analog and discrete inputs is ideal for use on wellheads for monitoring casing, tubing, and surface pressure levels as well as monitoring arrival sensor. In addition, this superbly design product includes a junction box and wiring terminal block for making wiring hassle-free.
  • All WT Series Wireless Transmitters are equipped with a local LCD display that can be used for reading process data and for programming the device. Thus, cables and PC are no longer required for quickly setting up the device.
  • The Wireless Analog/Pressure Transmitter is intrinsically safe (certified for use in Class 1 Division 1 C1D1 Wireless (Zone 0) hazardous areas). It can be operated in a hazardous environment with or without the enclosure without the risk or fear of causing an explosion. This wireless end node transmits collected data to a Wireless Gateway that supports Modbus. The transmitter uses license-free, secure data transmission with a range of up to 7500 ft. Range (2.3 Km).
  • Especially in the oil and gas industry, the Analog Pressure Sensor Transmitter is the ultimate wireless wellhead solution for wireless remote monitoring of oil wells, gas wells, natural gas wells, and production wells.

Capabilities

  • Self-Contained, Battery-Powered, Intrinsically Safe
  • 3x Analog Inputs (0-5 Volt, 24-bit ADC)
    – Provides Ability to Calibrate Zero and Max Points
  • 1x Discrete Input (For Dry Contact or Open-Drain Output/NPN Device)
    – Normally Open or Normally Closed Input Function
    – On/Off Status Reporting, Transition Count Reporting
    – On Delay Exception Reporting
  • Available with 15 to 15,000 PSI Pressure Sensor (sold separately)
  • Utilized for Countless Number of Process Applications
  • Terminal Block Makes Wiring Hassle-Free
  • Connects to Wireless Gateways
  • Model Numbers:
    900 MHz: WT-0900-AD1
    2.4 GHz: WT-2400-AD1

Tech Specs

SPECIFICATION DESCRIPTION
HARDWARE FEATURES
Device Functionality Analog/Discrete Input Wireless Transmitter
Embedded Controller Ultra-Low Power RISC Microcontroller with Internal FLASH (Field Upgradeable)
User Interface Standard RS232 Serial, LCD Puck Module
I/O Interface 3x Analog Inputs (0-5 Volt), 24-bit ADC

1x Discrete Input (For Dry Contact or Open-Drain Output/NPN Device)

Power Source Self-Contained, Internal 3.6 V Lithium Battery (Replaceable)
Available Power Supplies Sensor Power Up to 9.5 V
Sensor Power Up Delay Approximately 500 ms
Internal Battery Life Up to 10 Years, Based on Usage
Local LCD Display 32-Character Display (16×2 Lines) with 4 Function Keys + Read Button
Instant Displayable Read Analog Input 1, 2, 3 / Discrete Input / Battery Voltage / RF Status
Local Configuration Cable-Free RF Connection and Setting All Device Parameters
WIRELESS COMMUNICATIONS
Radio ISM Band, FSK (Frequency-Shift Keying)

AES Encryption 256-bit (900 MHz)/128-bit (915 MHz)

FHSS (Frequency Hopping Spread Spectrum)

Frequency 900 MHz
Data Rate 9600 bps / 115.2 kbps
Output Power 1 mW or 10 mW
Receiving Sensitivity -110 dBm @ 9600 bps or -100 dBm @ 115.2 kbps
Range Up to 7500 Feet (2.3 km) with Clear Line of Sight*
CERTIFICATIONS & COMPLIANCE
EMC/EMI FCC Part 15 (USA); IC ICES-003 (Canada)
Safety
  • Class I Division 1, Groups A, B, C, D T3C
  • Class 1 Zone 0 AEx ia IIC T3 Ga; Class 1 Zone 0 Ex ia IIC T3 Ga
  • ATEX: Sira 13ATEX2142X; Ex ia IIC T3 Ga; II 1 G
  • IECEx: SIR 13.0054X; Ex ia IIC T3 Ga
MECHANICAL SPECIFICATIONS
Dimensions 5.25″ (W) x 13.2″ (H) x 4.25″ (D) / 134mm (W) x 335mm (H) x 108mm (D)
Package Dimensions 10.25″ (W) x 14″ (H) x 6.5″ (D) / 260mm (W) x 356mm (H) x 165mm (D)
Weight Net: 5.5 lbs / 2.3 kg Gross: 8 lbs / 3.6 kg
Mounting Hardware Direct or Pipe Mount
Hardware Connection 2x 3/4″ NPT Female (Includes 1x 3/4″ to 1/2″ Reducer Bushing)
Enclosure Casing Material Type 4X Aluminum; IP66
GENERAL SPECIFICATIONS
Operating Conditions
  • Ambient Temperature (Class I; Division 1): Transmitter -40 °F to 158 °F (-40 °C to 70 °C); LCD Screen -4 °F to 158 °F (-20 °C to 70 °C)
  • Ambient Temperature (ATEX, IECEx): -20 °C to 70 °C (-4 °F to 158 °F)
  • Ambient Temperature (Non-Hazardous Applications): Transmitter -40 °F to 185 °F (-40 °C to 85 °C); LCD Screen -4 °F to 158 °F (-20 °C to 70 °C)
  • Humidity: 0 to 99 %, Non-Condensing
Warranty 2-Year Parts and Labor
Country of Origin Made in USA

Reviews

There are no reviews yet.

Be the first to review “AD1 – Analog/Pressure”
Go to Top