Wireless I/O

Home » Wireless I/O and Modems » Wireless I/O
  • 105U

    Wireless I/O
    The ELPRO multi-I/O products are two-way communication devices which transmit signal values by radio (specifying the value and I/O output channel) to a receiving module. The receiving module then decodes the message, generating/re-creating the value at the specified I/O channel outputs. ELPRO 105U series products have four differing I/O versions and can multi-hop repeat five times. When combined with ELPRO‘s 115S series products or gateway products, the 105U series can accommodate changing I/O and data-bus/protocol requirements.
  • 115E-2 Expansion I/O

    DNP3 Option
    Designed to work with wired and wireless devices, the ELPRO 115E-2 is capable of providing IP‑based I/O across sprawling industrial environments typical of industrial applications. The 115E-2 can serve as an end node or network gateway and is scalable to thousands of nodes. DNP3 protocol available.
  • 115S

    Expansion I/O
    The ELPRO 115S series allows end users to readily accommodate changing I/O needs as project specifications evolve. The 115S series can be used with ELPRO transceiver-based I/O, Gateway, Ethernet and Serial products to expand input and output count or act as Modbus slave I/O to connect other field devices. Connected via RS485 and communicating ELPRO WIBNetTM or Modbus protocols, the 115S series is available in three versions of I/O count and multiple 115S products may be daisy-chained to accommodate changing application needs.
  • 215U-2 WiFi I/O

    215U-2 Wi-Fi I/O
    Eaton is proud to announce the release of the 215U-2 Wi-Fi I/O Gateway solution. The 215U-2 brings a simple web-based user interface, utilizes a standards-based wireless protocol, introduces an innovative networking topology, and is sold at a significantly lower price point. Customers do not need a strong background in networking to set up a 215U-2 system. The 215U-2 can be added as part of a customer‘s existing wireless infrastructure. This allows the 215U-2 to be sold through multiple types of channel partners into both process and factory automation applications. It provides unique, cost saving features that not only reduce cost, but allow for reduced panel sizes and a smaller amount of control panels in a customer application.
  • 905U-1

    Wireless I/O
    The ELPRO 905U Wireless Multi-I/O is a node that extends communications to sensors and actuators in local, remote, or difficult to reach locations. Designed with a long range, license-free or licensed wireless transceiver, the ELPRO 905U module provides a simple to deploy solution to transfer process I/O signals reliably over long distances or within an industrial plant.
  • 905U-K

    Single Sensor Unit
    Designed with low power consumption and simple plug-in of ELPRO BU-5 Battery Packs, the ELPRO 905U-K provides reliable continuity in environments typical of industrial applications with power constraints. Capable of transferring analog, pulse or discrete inputs, and powering a loop-powered analog device (24Vdc, 50mA), offers a simple to deploy and highly reliable solution.
  • 905U-L

    I/O Transmitter/Receiver Pair
    The ELPRO 905U-L-T (Transmitter) and 105U-L-R (Receiver) products feature a small I/O count, one-way and cost-effective communications between field devices. The 905U-L series products are flexible by design (i.e., pre-configured pairs for ease of commissioning) and may be used in simple to complex, multi-hop repeating networks (in combination with other ELPRO I/O and gateway products).
  • 915U-2 Self Meshing I/O

    Self Meshing I/O Modbus, DNP3
    Designed with a long range, license-free 900MHz wireless transceiver, the ELPRO 915U-2 is capable of providing IP-based mesh networking across sprawling industrial environments typical of industrial applications. Capable of ad-hoc mesh networking, roaming and discovery, as well as deterministic mesh, the 915U-2 can serve as an end node, routing node or network gateway. Scalable to thousands of nodes, Gather-ScatterTM and Block Mapping technology offers the efficient utilization of network resources, and eases integration into complex monitoring and control systems. Integrated Modbus server capability allows further I/O expansion through the use of ELPRO 115S Expansion modules.
  • Condor Series 415U-2 Long-range Wireless I/O and Gateway

    The Condor Series I/O Gateway variant improves on the 415U-2 product line by significantly increasing the data throughput to an industry-leading 140kbps at 25kHz channel in licensed applications (with compression). The Condor Series products come in four easy-to-select frequency bands:
    • 148MHz — 174MHz,
    • 340MHz — 400MHz,
    • 400MHz — 480Mhz and,
    • 470MHz -520MHz.
Go to Top